Engagement rings are not complete without the right centerpiece. Flawless and vibrant-looking diamonds are the favorite pick in this department. However, they come with a price tag that may intimidate those with a fixed budget.
The word ‘cheap’ contradicts a diamond’s worth, but not all of them are unaffordable. With the right information and strategy, there is a higher chance that you will land on an item that will satisfy your preference and economy.
Diamonds falling to the VVS2 category belong to the higher ranks, but they are not the most expensive ones. Most ready-made engagement rings have a stone with this quality since it looks blemish-free and sparkling like those with immaculate features.
This article will enlighten you about the advantages and drawbacks of VVS2 diamonds. Who knows? This piece might be the right diamond that you have been looking for this entire time.
Table of Contents
The Basics of a Diamond’s Clarity Chart
Clarity has a huge contribution to the valuation of colorless diamonds. The clearer they look, the more expensive they become. That is why those with perfectly smooth facets, even at maximum magnification, are considered rare and have an exceptional cost.
It takes a gemologist’s expertise to identify a stone’s worth because they use a specific standard scale for clarity. The Gemological Institute of America (GIA) is one of the most trusted bodies that certify a diamond’s quality. Thus, if you want to know if an item is legitimate, look for its GIA report first.
Diamonds can fall to different categories in terms of clarity, namely:
- Flawless – FL
- Internally Flawless – IF
- Very Very Small Inclusions 1 – VVS1
- Very Very Small Inclusions 2 – VVS2
- Very Small Inclusions 1 – VS1
- Very Small Inclusions 2 – VS2
- Small Inclusions 1 – SI1
- Small Inclusions 2 – SI2
- Inclusions 1 – I1
- Inclusions 2 – I2
As you can see, FL is the highest grade of them all. It signifies that a diamond does not have any imperfection within and outside its confines. ‘IF’ diamonds are only blemish-free inside. They suit best with pieces that have larger sizes because they have the most fire and brilliance. However, diamonds in this category naturally have a pricier per-carat value that can extend up to a six-digit mark.
Their unreasonable rate fails to impress a lot of patrons. Thus, jewelry shoppers prefer settling for eye-clean diamonds with lower prices in the VVS and VS categories. The Very Very Small Inclusions group still has the upper hand in price, but it is a better choice than those in FL and IF.
How do VVS and VS differ? Imperfection exists in both groups, but their amount varies. All eye-clean diamonds are labeled Flawless at first. If blemishes like clouds, needles, crystals, and knots appear within a 10x magnification, they will fall to SI or VS ratings.
Pieces that still look clean shall undergo the assessment’s final stage, which is the 63x magnification. In the case an expert sees some flaws, they will be labeled as VVS diamonds.
This category has two divisions: VVS1 and VVS2. The former’s unappealing spots are located at the bottom or pavilion, while the latter is found at the table and crown area. In terms of price, VVS1 is more expensive than VVS2, although both their flaws are microscopic, and they exude the same sparkle from an average person’s perspective.
Most jewelers would suggest going for diamonds with VS and SI qualities for the best value.
However, clarity is not the only element that you must consider in picking a diamond. ‘4Cs’ is an infamous term that pertains to color, cut, clarity, and carat weight. They all affect the pricing of a diamond. Thus, if you get the largest piece with the highest qualities, you should not be surprised by its cost.
The good thing is you can balance each element’s qualities, depending on your priority and preference, to get the most practical deal.
VVS2 vs. Other Scales in the Chart
Now that you have learned the focal points of clarity, it is best to visually compare VVS2 diamonds with the other scales on the chart. By doing so, you will have a more comprehensive understanding of what and how to pick a diamond for an engagement ring and other accessories.
Two scales run closest to VVS2: VVS1 and VS1. They all have imperfections, but they vary in gravity and price. Most articles about diamonds suggest that stones with a VS1 clarity better option if you want an eye-clean diamond with a fairer price.
However, going higher is more advisable if the diamond’s shape does not hide blemishes well. A primary example of these diamonds is those with a step-cut design, such as emerald and radiant. Unlike round and oval, their facets are arranged neatly in a parallel manner, highlighting a more polished table area.
Since their surfaces are not as sparkling as the curvier diamonds, dents and needles are more likely to appear if you settle with a lower clarity scale.
Below are examples of radiant-cut diamonds from Blue Nile that have different clarity grades. They all weigh 1.50-carat with color H and very good cut qualities.
As you can observe, they look almost the same in a 10x magnification. The one on the left side is the diamond with a VS1 grade. It still has clear facets, even though it looks less brilliant than the other two. However, you can notice that its darker shadows are more apparent. The upside of this piece is its $10,000 price.
Those at the center and right side are the diamonds with VVS2 and VVS1 ratings, respectively. They look perfect and identical in that face-up perspective since their flaws are expected to be microscopic. But if you look closely, the sides of the radiant stone at the center appear less appealing than the VVS1 diamond. Both ranges around $11,000, with the former having a lower amount.
Moreover, they say that VVS2 diamonds are better than Flawless and Internally Flawless diamonds since they look immaculate from an average person’s view. We have two Blue Nile diamonds below with the same qualities as those stones we featured earlier to prove this point. The only difference is the IF quality of the right photo.
Which do you like best in terms of appearance? Some would say VVS2, while others support IF. Regardless of your preference, one truth remains. The IF diamond costs $15,000, which is 26% higher than the other variant.
As we said earlier, clarity is not the only consideration in diamonds. It is only one of the four major elements, and the amounts we included above also depend on these qualities. If you opt for a diamond with more colorless features, the chance of having a more expensive price is greater.
Thus, we always remind jewelry shoppers to be vigilant about a diamond’s features. You can save more and spend on other essential things if you know better about its qualities.
If you want to learn more about cut, color, and carat weight, we have separate articles dedicated to these topics.
The Whys in Choosing a Diamond With a VVS2 Clarity
Since diamonds with VVS2 clarity grade is more expensive than VS and SI pieces, why should you still prefer them? Below are some of the advantages that make a VVS2 diamond stand out over others.
#1. Less Expensive Than Flawless and Internally Flawless Diamonds
For people who cannot afford to splurge a lot, the price does matter when buying a diamond. Aspiring for the most flawless diamond is not bad, but you should not milk all your funds for it. Thus, finding the closest alternative is the right move.
VVS2 ranks fourth highest in a diamond’s clarity chart. It represents 2% of the market’s rarest pieces, but it is not as expensive as FL and IF. Their minimum price ranges from $4,000 to $5,000, depending on their weight, cut, and color qualities. Those with higher ratings cost around $7,000 or more.
#2. Blemishes Are Microscopic
What you can expect from a diamond with a VVS2 clarity grade is its clean, glossy, and sparkling finish. As we said earlier, it takes up to 63x magnification before an expert will notice any dents on a stone’s facets. Even gemologists take a hard time noticing these flaws.
Thus, if you are after a jewelry piece that looks as blemish-free as those with more expensive prices, a VVS2 diamond is your best buddy. You can even go for stones with heavier carat weight. However, it would be best to choose a shape that does not have a larger table area, like round and princess-cut, because its flaws are situated on that portion.
#3. Best for Investments
Some people do not buy diamonds to set them on a ring or any jewelry items. Instead, they buy one as a collectible or an addition to their investments. If you are one of them, you will probably choose those with higher quality grades.
Fortunately, VVS2 clarity is one of the scales with better features than other diamonds. They may not have the least expensive price, but their value increase as they get rarer over time.
The number of naturally grown diamonds is becoming lesser, and growing diamonds in a laboratory is not sustainable. Thus, keeping an item with this quality is a tremendous asset in the long run.
Best Companies That Offer Diamonds With VVS2 Quality
Diamonds with VVS2 clarity grades and higher are considered rare diamonds. They take up only 5% of the total number of diamonds in the market. That is why they are more expensive than those of lower quality.
Due to this limited supply, you may find a hard time searching for these diamonds online and in brick-and-mortar shops. Luckily, several trusted companies do not run out of choices on any diamond variants. We will highlight two of these companies below to lessen your baggage in finding the right piece.
Most of the diamonds we highlighted earlier came from Blue Nile. The reason for this is the company’s reputation for providing more reasonable prices to its customers without compromising their quality.
Blue Nile began selling diamonds in 1999 when the internet is not yet as advanced as we know it today. The company envisions to increase the number of people who can afford to buy engagement and wedding rings without suffering for an expensive amount. This goal and journey commenced when its owner felt frustrated after failing to find an engagement ring that suits his budget.
To achieve its objectives, Blue Nile uses a business model that allows them to price a stone lesser than other companies. They skipped on having a middleman and directly partners with diamond suppliers globally. Today, Blue Nile houses more than 100,000 diamonds, and the number is increasing annually.
They ensure that each piece is handpicked by their expert jewelers so that people have more options on their plate. Moreover, this company also champions a 360-degree display technology on their website that allows you to check an item virtually. Its team uploads HD images that reflect the diamonds’ real-life qualities.
Suppose you are anxious and uncertain about how to begin shopping. In that case, the company also offers an option where you can talk with an expert to clarify the diamond qualities further. Its customer service helpline is also available 24/7.
This company is not the second-best because it is as prominent as Blue Nile. James Allen Schultz established the company in 1998 with his wife, Michele Sigler. Its initial name was DirtCheapDiamonds, but it rebranded in 2002 into JamesAllen.com.
What drives the brand to strive better each day is its mission to offer the highest quality diamonds at the best price. James Allen is an online shop with the largest selection of diamonds and gemstones from the most reliable suppliers worldwide. It follows the same business model that runs Blue Nile.
What makes this company unique is that it allows customers to compare a diamond’s size and color in real-time without driving to their nearest jewelry shops. You can browse its website in the comforts of your home at any time. It also offers free shipping worldwide, jewelry insurance, and monthly installment plans to give you more options when shopping.
James Allen also values the education of its clients. Thus, they dedicate a section to learn more about the 4Cs and some tips on making the most of your budget. Moreover, you can reach them if you have any concerns with your transaction or the jewelry piece you received.
It is not rare to find an online jewelry store these days. What is rare is finding a reliable company that offers numerous diamonds with various qualities and favorable prices.
Both Blue Nile and James Allen also offer markdowns throughout the year, especially during holidays and special occasions. You may find a diamond with a VVS2 clarity grade at a discounted price if you are lucky.
The Verdict: Is a Diamond With a VVS2 Clarity Worth It?
Diamonds with a VVS clarity grade are less expensive than those with FL and IF ratings. However, it is not as affordable as VS and SI diamonds. If we question its practicality, it is not the most reasonable pick in the market for some people.
We say some because a few are willing to go the extra mile to have a blemish-free item. Collectors and investors will love that VVS2 diamonds are rarer and have higher values. But for a person whose budget is fixed below $10,000, finding a piece in this group is extra challenging.
However, there is light at the end of the tunnel. We keep on reiterating that the key in shopping diamonds is finding a reliable source and knowing the whys and hows of a diamond’s qualities.
Nowadays, more people shop online because of the convenience it provides. Still, some potential clients do not have any idea where to start. For you to feel safe and confident, it is best to go with companies that have proven their performance for years, such as James Allen and Blue Nile.
They never fail to adapt to their customers’ needs because their core mission is to allow more people to afford diamonds with premium quality. If you have not visited their websites yet, maybe it is high time for you to begin checking on some items from them today.
The diamond’s 4Cs highly affect its valuation. If you stand firm in prioritizing a diamond with a VVS2 clarity grade, you must ensure to strike a balance in the other elements so that you will find a piece that will still suit your budget. Sorting is not a problem with Blue Nile and James Allen because they have comprehensive filter options to make life easier for you.
VVS2 diamonds are only worthy if you have the extra budget to splurge for their price. Safer eye-clean options are still available in the VS and SI categories.